UDG4: Changing the floor load

Note: The floor load setting is only used for energy calculation and has no influence on the operation of your heating system.

• 1. Press ≡, top right corner
  • 1.1. Press "Energy Use"
  • 1.2. Press ▶, on last page press "Floor Load"
  • 1.3. Change/Adjust the floor load setting with ▲ and ▼
  • 1.4. Confirm with ✔

  • Note: The load of your floor heating can be found in the inctructions/technical specifications that followed the product. If you dont have access to these, contact your place of purchase.